Phosphoric acid-based descaler for dishwashers and washing machines. Very quickly removes all calcareous residue.
10 - 30% (1 L - 3 L in 10 L of water).
MECHANICAL USE: dilute the product directly in the tank for dishwashers and act a wash cycle. MANUAL USE: let the components to descale soak. Leave to act and rinse.
Fast-acting detergent, highly effective for ink and marker pen stains and for greasy stains. Guarantees an instant and effective cleaning action on the most stubborn stains. Leaves surfaces clean and free of traces. Eliminates the most stubborn stains such as indelible felt-tip pens, ink, etc. from hard surfaces. Ideal for all periodic and comprehensive cleaning where no rinsing is required. Floral scent, allergen-free (Reg. 648/2004), delicate and long-lasting fragrance. It contains vegetal origin raw materials (e.g. surfactants, soap) coming from the processing of coconut oil. Phosphate free. APPLICATIONS: removal of heel marks from untreated floors, removal of insects from the glass, removal of adhesives and glues from glass, floors, washable surfaces and unpainted aluminium, dry wax stripping of floors (except rubber or linoleum).
Ready to use. Also suitable for the cleaning of internal surfaces within boats, ships and other transport. The suggested dilution allows to economize and reduces the environmental impact to the minimum. This product is not intended for large-scale cleaning.
750 ml size: spray the product over the surface to remove the stain from and wipe until completely dry. 5 kg size: pour the product into the sprayer before use. Spray the product over the surface to remove the stain from and wipe until completely dry. For small surfaces and daily dirt, spray the product onto the cloth. Spot test on an inconspicuous part of material (fabrics, leather, etc...) before use to make sure it is compatible. Check colourfastness on painted surfaces. Do not use on ABS plastic (e.g. special telephone covers), keyboards, LCD screens. Do not spray the product directly onto electrical appliance components. Do not use on coated floors and surfaces.
Highly concentrated disinfectant* detergent colourless and fragrance-free, based on fifth generation quaternary ammonium salts, for the daily cleaning and disinfection of all washable surfaces. For general surfaces, including in the food area and in the medical area. Also suitable for the cleaning and disinfecting* surfaces that can come into contact with food (HACCP). Ideal for removing organic dirt from all surfaces (even floors). RATIO System.
It is particularly suitable for disinfecting environments where there is the risk of contamination, and however in all environments used by the public (hospitals, schools, hotels, offices, locker rooms, bathrooms). COMPOSITION: 100 g of product contains: Didecyldimethylammonium Chloride (DDAC (C8-10)) (CAS n. 68424-95-3) 6,55g; Alkyl (C12-16) dimethylbenzylammonium chloride (ADBAC/BKC (C12-16)) (CAS n. 68424-85-1) 4,37g; Co-formulants and water up to 100g. In compliance with the following EN Tests standards*: 1276, 1650, 13697, 14476, 16777.ONLY USE DILUTED! Product diluted/dosed by the RATIO dosing system. For further information please contact the Sutter Professional technician.
With its long lasting scent and high concentration, it leaves a lingering fragrance that eliminates any unpleasant smells. Intense and velvety fragrance with fresh notes of typical springtime flowers, such as hawthorn, lily of the valley and several varieties of lightly fruity rose. A bouquet of harmoniously blended flowers that concludes with persistent lingering base notes of wood and musk.
Ready to use.
Acid descaling cleaner specifically for removing limescale deposits from enamelled surfaces, taps, stoneware and ceramics. In compliance with the following EN Tests standard*: 1276 (Sol. 4%).
3% - 5 % (300 ml to 500 ml in 10 L of water) For stubborn deposits on hard surfaces (stoneware, ceramics, concrete) dilute to 10% (1 L every 10 L of water).
Dilute the product in water to the recommended concentration. Clean the surfaces. Rinse thoroughly.
Scented and lightly abrasive cream detergent ideal for the bathroom environment. The combined action of the synergising surfactants and micronised powders allows quick and effective cleaning without leaving streaks and without scratching. Cleans quickly, excellent for removing all types of stains from ceramics, chrome, laminate surfaces and stainless steel.
Ready to use.
Shake the bottle well before use. Pour small quantities of product onto a damp sponge cloth, wipe the surface and rinse.
Antibac Cream Plus is to be used to disinfect hands and skin on all occasions when thorough hygiene is required. Disinfectant* handwash cream, also suitable in the medical area and food sector (HACCP). COMPOSITION: 100 g product contains: Didecyldimethylammonium chloride (DDAC (C8-10)) (CAS No. 68424-95-3) 0,576 g; Alkyl (C12-16) dimethylbenzylammonium chloride (ADBAC/BKC (C12-16)) (CAS No. 68424-85-1) 0,384 g; Co-formulants (surfactants, thickeners, solvents and water) up to 100 g. Contains: amphoteric surfactants <5%. Contains: Disinfectants. In compliance with the following EN Tests standards*: 1276, 1499, 1650, 13624, 13727, 14476.
Ready to use.
Pour about 5 ml of product onto the palm of your hand and wash for at least 1 minute. Rinse thoroughly and dry. Do not use on injured skin, mucous membranes or the patient's skin prior to a pre-operative medical procedure. To be used with the:
Antibac Foam Plus is to be used to disinfect hands and skin on all occasions when thorough hygiene is required. Disinfectant* handwash foam, also suitable in the medical area and food sector (HACCP). COMPOSITION: 100 g product contains: Didecyldimethylammonium chloride (DDAC (C8-10)) (CAS No. 68424-95-3) 0,576 g; Alkyl (C12-16) dimethylbenzylammonium chloride (ADBAC/BKC (C12-16)) (CAS No. 68424-85-1) 0,384 g; Co-formulants (surfactants, solvents and water) up to 100 g. Contains: amphoteric surfactants <5%. Contains: Disinfectants. In compliance with the following EN Tests standards*: 1276, 1499, 1650, 13624, 13727, 14476.
Ready to use.
Specific alkaline detergent for removing burnt fat from ovens, grills, hot plates and roasting spits. Suitable for use in the food area (HACCP).
Ready to use
Heat the surfaces to be cleaned at 60°-70°C. Turn off and afterwards spray the product evenly. Leave to act for a few minutes, rub with abrasive tool and rinse with sponge cloth and water. Before use the oven heat for 10 minutes.
Superactive graffiti removal gel for external surfaces of trains, tram, railway cars, etc. Rapid action. It adheres to vertical surfaces.
Ready to use.
Apply the product to the surface with a brush or soft brush. Leave to act and rub. Remove with a squeegee or with a high-pressure water jet. Suitable also for use on aluminium. Suitable personal protective equipment must be used.
Multi-purpose detergent for all modern surfaces, mirrors, windows and doors.
1 ECOCAPS in one 500 ml bottle of water (preferably warm). The suggested dilution allows to economize and reduces the environmental impact to the minimum. A small amount of product is enough compared to a diluted product.
Put an ECOCAPS directly into the bottle and add water. When the capsule has dissolved, clean the surfaces. Spray the product onto the cloth. If the case of excessive dirt, spray onto the surface and rinse.
Descaling and deodorising detergent for taps, coverings and bathroom furnishings. It leaves surfaces glossy and prevents lime from redepositing
1 capsule in 500 ml of water (preferably warm). The suggested dilution allows to economize and reduces the environmental impact to the minimum. A small amount of product is enough compared to a diluted product.
Degreasing detergent for all surfaces. Excellent for removing fatty residue also in the food area (HACCP). Also ideal for being used on stainless steel surfaces.
1 ECOCAPS in one 500 ml bottle of water.
Concentrated neutral detergent suitable for maintenance of all types of floor including wax-treated ones. Pleasant scent.
2% - 4% (200 - 400 ml in 10 L of water).
Product yields (m2/lt):
| Operation category | Conc.% | Product yield (m2/lt) |
| FLOOR MAINTENANCE | 3% | 450 |
Dilute the product in water to the recommended concentration. Manual application: apply the solution with a mop or flat mop; remove the solution with a well wrung mop or flat mop. Application with scrubbing machine: Pour the solution into the tank and then wash.
Wax that protects conductive floors in areas where the dispersal of static electricity is essential to safety. Does not isolate the floor (cert. 25246, Italian Galileo Ferraris National Electrotechnical Institute, Turin).
Ready to use.
Product yields (m2/lt):
| Operation category | Conc.% | Product yield (m2/lt) | Notes |
| FLOOR WAXING | 100% | 20 | 2 coats |
After carefully removing wax using a wax stripper from the SUTTER PROFESSIONAL range, rinse and apply two coats of wax using the special wax applicator. Leave to dry approximately 45 min. between one coat and the next. Also suitable for maintenance with UHS spray (single disc machine at very high speed with cream disc) by diluting Elettra 1:3 with water.
Specific detergent for dry cleaning of carpets and rugs. Very quick drying with anti-stain effect and pleasant scent.
3%-10% (300 ml 1 L every 10 L of water).
Parfume free multi-purpose detergent for daily cleaning of all furniture. Recommended for glasses, mirrors, washable surfaces etc. The daily usage of Diamond Free, thanks to its formula with anti-redeposition agents, allows for an excellent protection of surfaces and easy maintenance. Also suitable for the cleaning of internal surfaces within boats, ships and other transports. It contains vegetal origin raw materials (e.g. surfactants, solvents) coming from the processing of sugar beet and corn. Parfume, phosphate and nickel-free (less than 0.01 ppm). Dermatologically tested product (human patch test - not tested on animals). The absence of CLP warning signs means that the product is safe both for the operator and the environment, provided it is used according to the usage instructions and to the other information on the label.
Ecolabel-certified: IT/020/009.Ready to use. The suggested dilution allows to economize and reduces the environmental impact to the minimum. This product is not intended for large-scale cleaning.
Acid cleaner specifically formulated to remove limescale deposits from surfaces. Suitable for first treatment of terracotta, concrete or stone floors.
10% - 20% (1 L - 2 L every 10 L of water).
Buffered super-active acid detergent for the removal of scale, cement, white lead residues, salt efflorescence and rust from acid-resistant surfaces. Excellent also for cleaning cement mixers. Also ideal for final cleaning of the construction site for the removal of whitewash and plaster.
5% - 20% (0,5 L - 2 L every 10 L of water).
Natural and aliphatic solvent-based degreasing microemulsion with high solubilising power.
MECHANICAL CLEANING: 2% - 5% (200 ml to 500 ml in 10 L of water); MANUAL CLEANING: 5% - 15% (500 ml to 1,5 L in 10 L of water).
Dilute the product in a bucket for MANUAL cleaning or with SCRUBBING MACHINES/SINGLE DISC MACHINE. Apply to surface; leave to act, rub to remove stubborn dirt and then rinse. Suitable for stains like rubber, tar, glue, etc. Also suitable for dry wax stripping.
Detergent for all washable surfaces and maintenance of all types of floor, including protected ones. Water-soluble capsule system.
1 ECOCAPS in 5 L of water (preferably warm). The suggested dilution allows to economize and reduces the environmental impact to the minimum. A small amount of product is enough compared to a diluted product.
Put an ECOCAPS directly into the bucket (or in small scrubbing machines) with 5L of water. When the cap has dissolved, wash the surfaces. Can also be used without rinsing.
